PRESS RELEASE
New SW10K Powered Subwoofer from ESI
April 10, 2005
 |
| SW10K |
 |
Rear Panel
(Click for a close-up) |
ESI has released a powered studio monitoring subwoofer, the SW10K.
SW10K provides frequency response of 30Hz to 180Hz with adjustable 50Hz to 180Hz range. It has XLR balanced and TRS balanced/unbalanced input connectors as well as XLR balanced output connectors for the satellite speakers.
Main Specifications:
- Type: Powered Subwoofer
- Subwoofer Driver: 10" black paper cone with high temperature voice coil and damped rubber surround.
- Frequency Response: 30Hz - 180Hz, Adjustable 50Hz – 180Hz
- Amplifier Power: 100W@100Hz, 4 ohm, 0.1% THD
- Dynamic Power: 120W
- S/N Ratio: >100dB below full output
- Input Connectors: 2 x XLR R/L Balanced Input Connector, 2 x TRS Balanced/ Unbalanced Input Connector
- Output Connectors: 2x XLR Balanced output for Satellites
- Controls: Level, Phase, Subwoofer Frequency, Satellite Frequency
- Switches: Power On/Off slide switch, L&R XLR Outputs "HPF Bypass" On/Off Slide Switch.
- Input Impedance: 20K ohms balanced, 10K ohms unbalanced
- Input Sensitivity: 150 mV input produces full output with Input Sensitivity control at maximum.
- Protection: over temperature, shorting, an external main fuses.
- Indicators: Power ON (Red)/ Protection (Red) /Operation(Green)
- Power Requirements: Factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or 100V~50/60Hz; Power via detachable 3 circuit line cord.
- Cabinet: vinyl laminated MDF
- Dimension (unit): 384mm(H) x 354mm(W) x 384mm(D)
- Net Weight: 12.5 Kg (27.5 lbs) /unit (without packing)
MSRP US$299.99
For more information, visit their web site at
http://www.esi-pro.com/.
|
28 readers say this product rates (out of 5):
|
|
|
Vote on this product!
Recent EGO SYS headlines
More EGO SYS Headlines