Sonoscope Audio Analysis Software from SEK'D
 |
|
(Click for a larger image) |
June 4, 2001
SONOSCOPE is a stand-alone Windows application for real-time analysis of audio
signals. Developed for use in mastering studios and audio laboratories,
SONOSCOPE contains several different components. The main application is the real-time spectrum analyser. Additionally, a sample signal display, a level
(peak) meter, a stereo meter, and a correlation degree meter have been
included.
SONOSCOPE works with any Windows audio card, preferred are digital
interfaces. But an internal
compensation setup allows to use analogue cards as well.
Technical Specifications:
- 32 Bit digital engine
-
FFT resolution: 256 - 65536 points
-
Octave band display: 1/1, 1/3, 1/6, 1/9, 1/12, 1/24
-
Wide-band display: linear, logarithm (0,67Hz - 22kHz, the lower frequency is depend on the selected FFT resolution)
-
Sampling frequency:11025 Hz - 96000 Hz
-
Bit resolution: 8 Bit - 24 Bit
-
Frequency valuation curves: A, B, C, D
-
Display functions: Hanning, Hamming, Blackman, Bartlett
-
Average setting: Linear or exponential
-
Compensation: left and right channel separated, 2 units at time (e.g. sound card and test microphone)
-
Easy calibration of the inputs (separated left and right channel calibration possible)
-
Store function: 4 stored frequency curves per channel (+ active signal!) can be displayed and compared simultaneously
-
Peak-Hold function: Attack and decay time adjustable
-
Display and colour settings can be adjusted (frequency band display:: beam, lines, spleens)
-
Zoom function
System Requirements:
- Pentium II CPU, min. 300 MHz
- 64 MB RAM
- Graphic card with 1024 x 768 resolution, 16 Bit colour depth
- Windows 95/98/ME/NT/2000
Suggested Retail Price: 199 EURO
A 10 day full working evaluation version is available from the company's web site. For more information, visit their web site at www.sekd.com. |
